Suspended Access Equipment Training

As of January 1, 2017, there are new Regulations for Suspended Access 213/91 Section 138-142.

These include changes to inspection, setup, training, documentation and notification to the Ministry of Labour.

The pre-requisite for doing Suspended Access User and Installer training is to have your Working At Heights training. You will need to provide proof of training.

Successful participants will be issued a Record of Training.

1 Day Suspended Access User/Operator

Training will consist of adequate oral and written instruction for using a Suspended Work Platform System or Boatswain’s Chair, including instruction on….

  • Regulations under the Act

  • Related Fall Hazards

  • Selecting, putting on, using and inspecting PPE and it’s components

  • Identifying and using fixed supports

  • Components, functions and limitations of tiebacks and operational controls

  • Reading and using Roof Plans and Work Plans

  • Load limitations

  • Emergency Rescue Elements

     

    Training will also consist of the worker being able to demonstrate proficiency in….

     

  • Selecting, putting on, using and inspecting the PPE

  • Rigging procedures and tying adequate knots

  • Locating fixed supports identified in a Roof Plan

  • Safely operate the Suspended Work Platform

  • Operating the control of the Suspended Work Platform

2 Day Suspended Access Installer

Training will consist of adequate oral and written instruction for using a Suspended Work Platform System or Boatswain’s Chair, including instruction on….

  • Rigging

  • Methods of securing beams and equipment

  • Fixed supports

  • Principles of suspension lines, hoisting devices and load limits

  • Manufacturer’s instructions for assembling, installing and disassembling

  • Reading and using Roof Plans and Work Plans

  • Securing platform to face of a building

  • Electrical systems

     

    Training will also consist of the worker being able to demonstrate proficiency in….

  • Installing rigging hardware

  • Inspection of cables and terminations

  • Tying adequate number of different knots

  • Correct set up in line with Roof Plans, Work Plans and manufacturer’s instructions, including:

    • Selection and use of fixed supports

    • Setup of equipment

    • Use of hoists from reeving cables

    • Use of descent controls and emergency controls

    • Impact of different Work Plans on setup of equipment

    • Protection of Public Ways Reg 242/16,s.11.

OR call us 877 738 9178

Available Courses

© 2020 Construction Workplace Safety Training Ltd. All rights reserved.

Contact Us

 

Telephone: (705) 812-1656
Toll Free:    (877) 738-9178
Fax:            (705) 812-0947
Email: info@buildwithsafety.com

 

Available Training

 

Our qualified trainers offer updated industry approved theory and practical hands on training. We provide industry standard testing, and provide same day certification.

Visit Us

Construction Workplace Safety Training Ltd.

41 King Street, Unit 2
Barrie, Ontario L4N 6B5